OPM150 Filter Mount

This filter mount screws into the front end of our OPM150 free beam heads and P10 and P20 series of integrating spheres. It may also be fitted into any of our OPM150 filter mounts. This item is used to mountplano optics and mechanics such as filters, diffusers and apertures onto OPM150 free beam an ...Read more

ORDER CODE: 30.070.00017

This filter mount screws into the front end of our
OPM150 free beam heads and P10 and P20
series of integrating spheres.
It may also be fitted into any of our OPM150 filter
mounts.


CHARACTERISTICS

Accepts plano optics and mechanics up to 9mm thickness






This filter mount screws into the front end of our OPM150 free beam heads and P10 and P20 series of integrating spheres. It may also be fitted into any of our OPM150 filter mounts.

This item is used to mountplano optics and mechanics such as filters, diffusers and apertures onto OPM150 free beam and integrating sphere detector heads.

An example filter file may be downloaded from our web site. This is useful when mounting custom filters. The example filter file should be overwritten with the data corresponding to the mounted filter according to the technical note which may also be downloaded from our web site. This filter file may then be loaded into the OPM150 software for ease of measurement when the filter is mounted.

The adapter has internal (female) M23.2x0.75 threads and comes complete with a PTFE washer to avoid damaging optics and a retainer ring (part number 20.430.00008).

The adapter is fitted by hand.

- Accepts plano optics and mechanics up to 9mm thickness

- External (male) M23.2 x 0.75 thread

- Internal (female) M23.2 x 0.75 thread