OPM150 Filter OD1 Absorbing

This filter screws into the front end of our OPM150 free beam heads and P10 series of integrating spheres. It may also be fitted into any of our OPM150 filter mounts. This item is used to extend the power range of OPM150 free beam and integrating sphere detector heads by a factor of approximately 1 ...Read more

ORDER CODE: 30.070.00014

This filter screws into the front end of our OPM150
free beam heads and P10 series of integrating
spheres.
It may also be fitted into any of our OPM150 filter
mounts.


CHARACTERISTICS

Extends power range by approximately 10x






This filter screws into the front end of our OPM150 free beam heads and P10 series of integrating spheres. It may also be fitted into any of our OPM150 filter mounts.

This item is used to extend the power range of OPM150 free beam and integrating sphere detector heads by a factor of approximately 10x. This is done by attenuating the input beam through absorption in the filter glass. The actual attenuation is wavelength dependant. A representative curve may be downloaded from this site.

The filter is delivered with its own filter file matching the serial number of the filter. This filter file may then be loaded into the OPM150 software for calibrated measurement when the filter is mounted.

The adapter is fitted by hand.

- Extends power range by approximately 10x

- Absorbing type neutral density filter

- Maximum power handling: 1W CW in at least 5mm diameter beam

- External (male) M23.2 x 0.75 thread