OPM150 Filter OD3 Absorbing

This filter screws into the front end of our OPM150 free beam heads. It may also be fitted into any of our OPM150 filter mounts. This item is used to extend the power range of OPM150 free beam and integrating sphere detector heads by a factor of approximately 1000x. This is done by attenuating the ...Read more

ORDER CODE: 30.070.00016

This filter screws into the front end of our OPM150
free beam heads.
It may also be fitted into any of our OPM150 filter
mounts.


CHARACTERISTICS

Extends power range by approximately 1000x



This filter screws into the front end of our OPM150 free beam heads. It may also be fitted into any of our OPM150 filter mounts.

This item is used to extend the power range of OPM150 free beam and integrating sphere detector heads by a factor of approximately 1000x. This is done by attenuating the input beam through absorption in the filter glass. The actual attenuation is wavelength dependant. A representative curve may be downloaded from this site.

The filter is delivered with its own filter file matching the serial number of the filter. This filter file may then be loaded into the OPM150 software for calibrated measurement when the filter is mounted.

The adapter is fitted by hand.

- Extends power range by approximately 1000x

- Absorbing type neutral density filter

- Maximum power handling: 1W CW in at least 5mm diameter beam

- External (male) M23.2 x 0.75 thread