OPM150 - 100kHz Base Module

The OPM150 100kHz base module contains the electrical transimpedance amplifier for the OPM150 detector heads as well as the USB communication module. In addition, this unit has an analogue voltage output via a BNC receptacle.The unit is USB powered and controlled. No external power supply is require ...Read more

ORDER CODE: 30.070.00058

The OPM150 100kHz base module contains the electrical
amplifier for the OPM150 detector heads as well as the
USB communication module. In addition, this unit has an
analogue voltage output.

CHARACTERISTICS

Interfaces: USB, analogue voltage (BNC)
Measurement bandwidth: 100kHz
Measurement range: 1kV/A – 10000kV/A
Gain control: 5 gain ranges
Functions: graph and digital display modes, averaging



The OPM150 100kHz base module contains the electrical transimpedance amplifier for the OPM150 detector heads as well as the USB communication module. In addition, this unit has an analogue voltage output via a BNC receptacle.

The unit is USB powered and controlled. No external power supply is required.
The enclosure is a solid body milled from full material. It is very robust and gives good shielding to electromagnetic interference. The base of the body has two tapped holes for mounting.

The unit is very compact with dimensions 60x81x36mm (WxLxH).

Connectors: DB9 (detector head); USB (communication); BNC (voltage output)

Bandwidth: 100kHz

Sampling rate: 30S/s (via GUI software); 1500S/s direct polling

Gain stages: 1kV/A; 10kV/A; 100kV/A; 1000kV/A; 10000kV/A

Accuracy: ±1%

Power supply: USB