Generic filters
Exact matches only

Optical Mirrors

Optical mirrors are elements used for beam steering, manipulation and imaging. They have a highly reflective coating on at least one surface of a glass or metal substrate.

The choice of substrate and coating depends on the application of the optical mirror. The substrate may be plano or spherical (glass or metal), or may be parabolic or ellipsoidal (on-axis or off-axis; metal substrates only). Parabolic and ellipsoidal mirrors are precision CNC machined with low surface roughness to avoid scattering.

Plano optical mirrors can be manufactured in almost any shape: round, rectangular, elliptical, or any other shape including cut-outs and drill holes. Holes may also be drilled at an angle to the surface normal.

The design of the mirror coating depends on the technical and economical requirements of the application. We offer dielectric coatings and metal coatings with protective overcoat.

Artifex Engineering offers custom dichroic mirrors tailored to your requirements. Dielectric coatings are particularly developed for the respective application and enable precise wavelength ranges, so that individual wavelengths or selected ranges can be specified.

Custom specialized dielectric optical mirros such as hot mirrors or cold mirrors are available in our portfolio. They are usually used where heat could damage a system.

Metal coatings may be aluminium, silver or gold.

Protected aluminium is economical, environmentally robust and reflects from the UV to the mid-IR. The reflectivity is not as high as for silver or gold and has an absorption dip from about 750-850nm.

Protected silver exhibits higher reflectivity than aluminium but does not extend as deeply into the UV. Silver is environmentally not as robust as aluminium and will tend to darken at the edges of the optical mirror with time.

Protected gold is the coating of choice for IR applications. This coating has the highest IR reflectivity and is environmentally very stable.

Protected copper is an economical choice for IR applications when the absolute environmental stability of gold is not required. The coating is far more robust than protected silver and has similar or better IR reflectance than protected gold.

Range of dimensions: 1mm – 600mm

Highest available surface figure: λ/10 (DIN: 3/0.2)

Highest available surface quality: 20-10 S/D (DIN: 5/1×0.06)

Wavelength range: single Wavelength (dielectric) or broadband (all types)

Example of metal coatings:

CoatingAngle of Incidence (AOI): 0°Angle of Incidence (AOI): 45°
UV enhanced AluminumAl-0°Al-45°
Protected SilverAg-0°Ag-45°
Protected CopperCu-0°Cu-45°
Protected GoldAu-0°Au-45°

 

You might also be interested in:

Contact Steve

Dr. Steven Wright

CUSTOMIZED SOLUTIONS

Contact Anja

Anja Weets

OPTICS

Contact Rolf

Rolf Jaspers

Instruments