Both polarization components are angularly displaced about the original direction of beam propagation. Thus, both beams transcribe a cone when the polarizer is rotated.
The separation angle of Wollaston polarizers is twice that of a Rochon polarizer of the same material. Both beams have high polarization purity.
The Wollaston polarizer is made of two birefringent material prisms that are cemented together. Optionally for high power applications, the crystals may be optically contacted.
The deviations of the ordinary and extraordinary beams are nearly symmetrical about the input beam axis, so that the Wollaston polarizing beam splitter has approximately twice the deviation of the Rochon polarizer. The separation angle exhibits chromatic dispersion. A range of custom separation angles can be designed upon the requirement. The separation angle of standard products is shown in the tables below.
As with all of our optics, we will gladly provide these items custom designed to your particular requirements. As an alternative, we offer a selection of standard items as specified below.
Standard products:
| Order No. | Extinction Ratio | Separation Angle (°) | CA ⌀ (mm) | O.D. ⌀ (mm) | L ± 0.1 (mm) |
|---|---|---|---|---|---|
| 50.230.00058 | <5x10-6 | 15-27 (16° at 800nm) | 6.0 | 15.0 | 14.0 |
| 50.230.00059 | <5x10-6 | 15-27 (16° at 800nm) | 8.0 | 25.4 | 16.0 |
| 50.230.00060 | <5x10-6 | 15-27 (16° at 800nm) | 10.0 | 25.4 | 18.0 |
| 50.230.00061 | <5x10-6 | 15-27 (16° at 800nm) | 15.0 | 30.0 | 23.0 |
| 50.230.00062 | <5x10-6 | 15-27 (16° at 800nm) | 20.0 | 38.0 | 28.0 |
| Order No. | Extincion Ratio | Separation Angle (°) | CA ⌀ (mm) | O.D. ⌀ (mm) | L ± 0.1 (mm) |
|---|---|---|---|---|---|
| 50.230.00068 | <5x10-5 | 2-3 (2° at 1064nm) | 6.0 | 15.0 | 20.0 |
| 50.230.00069 | <5x10-5 | 2-3 (2° at 1064nm) | 8.0 | 25.4 | 24.0 |
| 50.230.00070 | <5x10-5 | 2-3 (2° at 1064nm) | 10.0 | 25.4 | 28.0 |
| 50.230.00071 | <5x10-5 | 2-3 (2° at 1064nm) | 15.0 | 30.0 | 38.0 |
| 50.230.00072 | <5x10-5 | 2-3 (2° at 1064nm) | 20.0 | 38.0 | 48.0 |
| Order No. | Extinction Ratio | Separation Angle (°) | CA ⌀ (mm) | O.D. ⌀ (mm) | L ± 0.1 (mm) |
|---|---|---|---|---|---|
| 50.230.00073 | <5x10-6 | 19.6-23.3 (20° at 1550nm) | 6.0 | 15.0 | 14.0 |
| 50.230.00074 | <5x10-6 | 19.6-23.3 (20° at 1550nm) | 8.0 | 25.4 | 16.0 |
| 50.230.00075 | <5x10-6 | 19.6-23.3 (20° at 1550nm) | 10.0 | 25.4 | 16.0 |
| 50.230.00076 | <5x10-6 | 19.6-23.3 (20° at 1550nm) | 15.0 | 30.0 | 20.0 |
| 50.230.00077 | <5x10-6 | 19.6-23.3 (20° at 1550nm) | 20.0 | 38.0 | 25.0 |
We take quality control very seriously: we rely on accurate, widely recognized measurement systems for testing our optics. The following table indicates the accuracy of measurement for the most relevant parameters.
Surface figure: λ/20
Angle: 0,5 arcsec
Radius: 0,01%
Focal length: 0,03%-0,3%
Centration: +/-0,2µm or +/-2 arcsec
Wavelength: +/-0,3nm (190-1100nm)
We are known for:
Over 30 years experience in optics
ISO9001:2015 Certified
from the very first contact
at remarkable prices
CUSTOMIZED SOLUTIONS
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
OPTICS
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
Instruments
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information