Our waveplates are quoted standard unmounted, except for air-spaced waveplates which are quoted standard mounted. If you require mounted waveplates, the following is the list of our standard mounts. Of course, we can also manufacture to your custom size or design as required.
As with all of our optics, we will gladly provide these items custom designed to your particular requirements. As an alternative, we offer a selection of standard items as specified below.
Material: black anodized aluminium
Diameter tolerance: ±0.1mm
Thickness tolerance: ±0.1mm
Order No. | F (mm) | T (mm) | Aperture (mm) | CA (mm) |
---|---|---|---|---|
50.260.00102 | 15.0 | 6.0 | 8.0 | 7.0 |
50.260.00103 | 25.4 | 6.0 | 8.0 | 7.0 |
50.260.00104 | 25.4 | 6.0 | 10.0 | 9.0 |
50.260.00105 | 25.4 | 6.0 | 12.7 | 11.5 |
50.260.00106 | 25.4 | 6.0 | 15.0 | 13.5 |
50.260.00107 | 30.0 | 6.0 | 15.0 | 13.5 |
50.260.00108 | 30.0 | 6.0 | 20.0 | 18.0 |
50.260.00109 | 30.0 | 6.0 | 25.4 | 22.8 |
We take quality control very seriously: we rely on accurate, widely recognized measurement systems for testing our optics. The following table indicates the accuracy of measurement for the most relevant parameters.
Surface figure: λ/20
Angle: 0,5 arcsec
Radius: 0,01%
Focal length: 0,03%-0,3%
Centration: +/-0,2µm or +/-2 arcsec
Wavelength: +/-0,3nm (190-1100nm)
We are known for:
Over 30 years experience in optics
ISO9001:2015 Certified
from the very first contact
at remarkable prices