The zero order waveplate is designed to give a retardance of zero full waves, plus the desired fraction. Zero order waveplates show better performance than multiple order waveplates.
These waveplates exhibit broad bandwidth and a lower sensitivity to temperature and wavelength changes. They should be considered for more critical applications.
We offer optically contacted, cemented and air-spaced zero order waveplates. The choice depends essentially on economics and power handling capabilities.
Choosing the right waveplate for your application can be a bewildering task, as we offer a wide range for many different uses. Feel free to call us for assistance. Our experienced staff is only too pleased to help you with the decision process.
Feel free to call us for assistance. Our experienced staff is only too pleased to help you with the decision process.
As with all of our optics, we will gladly provide these items custom designed to your particular requirements. As an alternative, we offer a selection of standard items as specified below.
Wavefront distortion: λ/8
Retardation tolerance: λ/300
Parallelism: 1arcsec
Surface quality: 20-10 S/D (DIN: 5/2 x 0.1)
| Quarter Waveplates | Half Waveplates | Diameter (mm) |
|---|---|---|
| 50.260.00019 | 50.260.00025 | 10.0 |
| 50.260.00020 | 50.260.00026 | 12.7 |
| 50.260.00021 | 50.260.00027 | 15.0 |
| 50.260.00022 | 50.260.00028 | 20.0 |
| 50.260.00023 | 50.260.00029 | 25.4 |
| 50.260.00024 | 50.260.00030 | 30.0 |
Notice: Please indicate the wavelength after the order-number, such as: 50.260.000019-266.
Our standard wavelengths are: 266nm, 355nm, 633nm, 780nm, 808nm, 980nm, 1064nm, 1310nm and 1550nm.
| Quarter Waveplates | Half Waveplates | Diameter (mm) |
|---|---|---|
| 50.260.00050 | 50.260.00056 | 10.0 |
| 50.260.00051 | 50.260.00057 | 12.7 |
| 50.260.00052 | 50.260.00058 | 15.0 |
| 50.260.00053 | 50.260.00059 | 20.0 |
| 50.260.00054 | 50.260.00060 | 25.4 |
| 50.260.00055 | 50.260.00061 | 30.0 |
Notice: Please indicate the wavelength after the order-number, such as: 50.260.000019-266.
Our standard wavelengths are: 266nm, 355nm, 633nm, 780nm, 808nm, 980nm, 1064nm, 1310nm and 1550nm.
| Quarter Waveplates | Half Waveplates | Mount Diameter (mm) | Aperture (mm) | Thickness (mm) |
|---|---|---|---|---|
| 50.260.00040 | 50.260.00045 | 25.4 | 10.0 | 8.0 |
| 50.260.00041 | 50.260.00046 | 25.4 | 12.7 | 8.0 |
| 50.260.00042 | 50.260.00047 | 25.4 | 15.0 | 8.0 |
| 50.260.00043 | 50.260.00048 | 30.0 | 20.0 | 8.0 |
| 50.260.00044 | 50.260.00049 | 30.0 | 25.4 | 8.0 |
Notice: Please indicate the wavelength after the order-number, such as: 50.260.000019-266.
Our standard wavelengths are: 266nm, 355nm, 633nm, 780nm, 808nm, 980nm, 1064nm, 1310nm and 1550nm.
We take quality control very seriously: we rely on accurate, widely recognized measurement systems for testing our optics. The following table indicates the accuracy of measurement for the most relevant parameters.
Surface figure: λ/20
Angle: 0,5 arcsec
Radius: 0,01%
Focal length: 0,03%-0,3%
Centration: +/-0,2µm or +/-2 arcsec
Wavelength: +/-0,3nm (190-1100nm)
We are known for:
Over 30 years experience in optics
ISO9001:2015 Certified
from the very first contact
at remarkable prices
CUSTOMIZED SOLUTIONS
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
OPTICS
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
Instruments
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information