Generic filters
Exact matches only


ORDER CODE: 30.070.00006

A small area InGaAs photodiode detector head, compatible with the OPM150 series of optical power meter.

The special design of the material gives high sensitivity down to 400nm.

This gives an exceptionally wide range of wavelengths covering the most common types in a single head.

The head mechanics are designed to be compatible with various common optomechanics systems to allow simple integration. Various adapters for tube systems, camera objectives and optical fibres are available to further enhance the ease of integration.

When connected to the OPM150 base unit, each head is automatically recognized and its individual calibration data are uploaded to the system. In addition, the user may load up to 5 separate filter curves. Thus the dynamic range and functionality of the unit can be expanded while ensuring proper calibration.

  • Wavelength range: 400-1600nm
  • Sensitive area: ø 3mm
  • Minimum measureable power: 100nW (at 1550nm)
  • Maximum measureable power: 12mW (at 1550nm) with Base Module 30.070.00002 and 30.070.00112, 6mW (at 1550nm) with Base Module 30.070.00058
  • Maximum outer dimensions: ø30mm x 30mm
  • Calibrated diffuse reflecting attenuators: OD1, OD2
  • Adapters for tube systems
  • Adapters for fibre inputs: FC, SMA, LC, ø 1.25 ferrule

You might also be interested in:

Contact Steve

Dr. Steven Wright


Contact Anja

Anja Weets


Contact Rolf

Rolf Jaspers